310J Backhoe cuts Throttle and flashes STOP when in Gear
310J Backhoes have a safety seat. They have a sensor for when you are locked in the forward position and when you swing the seat around to dig. If one of the wires is broken or not making contact it effects all kinds of things. For the front switch if it is malfunctioning then it will cut throttle as you are driving because it is telling the computer that you are not in your seat and so it needs to cut throttle. It will also flash STOP but when you put it in neutral it stops flashing. Once again it is because the computer thinks you are driving with out being in the seat. If you go into the maintenance menu on the on board diagnostics and go to switches and watch the seat switches it will show you if they are working properly or not. It will tell you on or off for the front and on or off for the rear. If you are locked in the rear it should read on and vice versa. In order to fix this you have to dismantle the seat and remove the floor mat. Most places don't stock these switches though.
No comments:
Post a Comment